tv repair shop software
 

Software for repair shop
Assist Control



Free trial

tv repair

 Monitor repair forum - Open   
Download schematics and service manuals
See our courses below


 
       
 


  << Previous Topic | Next Topic >>Go to monitor repair course  

Monitor brightness

December 11 2005 at 9:31 PM
No score for this post
  (Login Legumedebaelish)

 
Greetings esteemed experts:

I have an AOC Spectrum 9Glr monitor, CRT. This may seem basic, but the image is quite dark, despite the fact that the brightness and the contrast are each at maximum. Is there any way I can make the image brighter so as to make reading easier?

-Legume

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply
Richard B
(no login)

Re: Monitor brightness

No score for this post
December 12 2005, 4:31 AM 

You need to check why brightness is low, check heater voltage if OK the maybe FBT resistors have drifted in value assuming G2 is supplied by FBT.

The G2 control is the nearest to the PCB out of 3 on the FBT adjusting this should increase the brightness if it is supplied by the FBT.

Rich B

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Jhon
(no login)

Re: Monitor brightness

No score for this post
January 8 2006, 2:48 PM 

You can find a solution to your problem in:
http://www.fixya.com/Product.aspx?prdid=395744

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - Monitor brightness
  << Previous Topic | Next Topic >>Go to monitor repair course  
 Copyright © 1999-2014 Network54. All rights reserved.   Terms of Use   Privacy Statement  
   TV repair course   TV repair forum     Monitor repair forum    Monitor repair course