monitor repair course
 

 Monitor repair forum - Open   
 Download schematics and service manuals
See our courses below


 		        

 

  << Previous Topic | Next Topic >>Go to monitor repair course  

Vertical Problem

January 29 2006 at 5:05 AM
No score for this post		   (Login leonmans)
I've got a vertical problem on a Proline Crystalview 17E Model LN-17E Monitor. 2 resistors R303 and R309 are burned
so badly that their color codes are not visible. The WYSE board has 2 numbers on it 991107-06M Rev AC, and 981107-01 Rev A,
also a sticker with the nr CU7206899. I did check the TDA8172 VERTICAL IC but their is no short on it.
If i can get a diagram on it i can trace, but i can not get hold of one, not even on the internet, and i am asking if anyone
can please help me with this problem.
Thank you
Leon
South Africa

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply
Richard B
(no login)

Re: Vertical Problem

Score 5.0 (1 person)		January 30 2006, 4:18 AM 

Hi I have sent some info see if it is near to what you are after.

Rich

 
Scoring disabled. You must be logged in to score posts.Respond to this message   

(Login leonmans)

Vertical Problem

No score for this post		January 31 2006, 8:55 AM 

Thanks Richard B for your help, my monitor is up and running due
to your support.
Leon

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - Vertical Problem
  << Previous Topic | Next Topic >>Go to monitor repair course  
   TV repair course   TV repair forum     Monitor repair forum    Monitor repair course