its resolution 800x600 H-lin correct
when go in to settings /then adapter/below left hand
corner shows rfresh rate/adapter default,optimal,5oHz,60Hz,
72H,75,100HZ at same resolution when we set this at 72HZ
picture becomes short from the first setting,
now when we open OSD it shows H 35.2KHz V 56.4Hz
this is when we pace extra display card on the mother board.
WHEN we use intel orignal display on board in settings /adapter below there is no icon/window for refesh rate in monitor settings it shows plg and play so for the second montior couldnot found resolution with intel board.
TELL WHAT TO DO NEXT
PKG
Scoring disabled. You must be logged in to score posts.
People check the monitor at 800x600 and work this resolution so we thought if we change the pf the display
increases . what u suggest,
with regards
p.k.gupta
Scoring disabled. You must be logged in to score posts.
it is high voltage capacitors its capacitance range is in
pF, in the horizontal section if we increase the capacitence of particular hv capacitors width increasesbut we r to see wch is with in limits some times it increases more than required out of window width then we r to reduce the value but voltage wvdc same or more will do
you suggest any other method as im many cases the width is reduced hw to increase that with in window
regards
p.kgupta
Scoring disabled. You must be logged in to score posts.
