I HAVE GATEWAY 1520 LCD MONITER SUDDENLY I GOT WHITE SCREEN
ONE FRIEND TOLD ME INVERTER TRANSFORMER IS BAD
PLEASE TELL ME WHERE TO GET THE TRANSFORMER

THANKX
RAN

If it is the inverter then the screen is totally dark no visible light.

White screen can be either panel fault or electronics sending the signals to it.

Rich B

Thank you Ricard
It is a good advice

Might be the electronics, but the majority of the time I have experienced this it is a small fuse in the lcd panel it's self when you get a snow-white screen.

Not sure what panel the 1520 has in it, but the fuse would be under the small metal cover right on the back of the LCD panel on the driver board, might be as small as a pin-head, right by the connector, may be labeled F1 or FU1 or something like that. You can check it with a multimeter, and hopefully if it is bad there are some markings on it, maybe a letter or two, that can be used to cross-reference a replacement.

Probably 9 out of 10 times (in my experience) the fuse is the only problem, replacing it returns the unit to operation.

Good luck.

Regards,

Mike