HAVE A NICE DAY!!!! Post Now
 

 Return  

I set my 4100s at 3/4 to 7/8" wet

October 11 2010 at 10:47 PM
No score for this post

Anonymous  (Login werbyford)
from IP address 24.5.227.245


Response to Wet and dry float settings for a C4AF-R 4100

 

They turn in the best 60ft time set at 3/4" wet, will really jump off the line. Probably better gas mileage and slightly less percolation at 7/8" wet.

See my shootout results at

http://www.network54.com/Forum/88781/message/1276066815/289+strip+times+and+carb+shootout

These floats were all 3/4" to 7/8".
If they are anywhere in that range I leave em alone.

I have two c4af-r carbs, they have 49f and 58f jets. Not sure what the factory jetting was, I bet the 59f in back might help things a little bit.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Responses

  1. Thanks Werbyford !! - winr1 on Oct 13, 2010, 6:32 PM
  2.  
Find more forums on TechnicalCreate your own forum at Network54
 Copyright © 1999-2014 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Post Now