HAVE A NICE DAY!!!! Post Now
 


  << Previous Topic | Next Topic >>Return  

4100 rebuild troubles

September 21 2008 at 11:27 PM
No score for this post		Henry  (Login ponch0v)
from IP address 216.18.139.235
 
Hi all

1966 mustang 4100.

Have it all torn down but can not get the rear venturi cluster screw to come loose. Did not want to force it. Soaked it in PB Blaster for four days now and still no luck. Also used a heat gun.

Any suggestions.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply

(no login)
71.227.216.65

Here we go again.........

No score for this post		September 23 2008, 10:09 PM 

Kroil or aerokroil by Kano labratories is the very best. Go online and order up a can, you will never use anything else again. Its all I ever use now.

Bill White
White Automotive

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Henry
(Login ponch0v)
208.81.157.86

Re: Here we go again.........

No score for this post		October 17 2008, 4:30 PM 

OK, soaked the venturi/screw in Kroil for three weeks now and it still will not budge. Anything else to do to it?


    
This message has been edited by ponch0v from IP address 208.81.157.86 on Oct 17, 2008 4:31 PM


 
Scoring disabled. You must be logged in to score posts.Respond to this message   

(Login ponch0v)
208.81.157.86

Re: 4100 rebuild troubles

No score for this post		October 21 2008, 1:13 PM 

ttt

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - 4100 rebuild troubles
  << Previous Topic | Next Topic >>Return  
 Copyright © 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Post Now