www.starion-turbo.co.uk
 


  << Previous Topic | Next Topic >>Back to index  

Alarm/Immobiliser Problem

August 4 2009 at 7:24 PM
  (Login Keefmiester)
from IP address 94.196.57.9

 
How can i reset my alarm/immobilser?

I have an old pirahna alarm fitted in '88, same age as my 2.0 EX, and the master key along with the fob which just has one button.

Problem is pirahna are no longer trading and i have no instruction manual:(

After switching on the alarm with the alarm master key after it had been deactivated for a while, the car turns over but won't start. Where as before i activated the alarm the car started and ran fine.

When pressing the Fob button it chirps and flashes the hazards, and the next time you press it hazards flash but no chirp. And just repeats this cycle. Help please?!

Have tried deacticating the Alarm with the key but still wont start, also took the battery off and left it off for 48hours.

Hope someone can help!

Cheers Keith

 
 Respond to this message   
AuthorReply
graham
(no login)
93.95.81.164

Re: Alarm/Immobiliser Problem

August 4 2009, 8:03 PM 

Trace all the wires and remove it, its way past its sell by date!

 
 Respond to this message   
Current Topic - Alarm/Immobiliser Problem
  << Previous Topic | Next Topic >>Back to index  
Create your own forum at Network54
 Copyright © 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
MITSUBISHI STARION OWNERS CLUB U.K.