Enoch Paintball live with Angel Lcd-g7fly and A1/SB boards

by Jeff Pace

Doc hope this ok.

Just wanted to let the old guard (myself included in that group) that might want to revive some old angels know of a project i have been working on.

For the past 2.5yrs I, with Jon Raymond (aka Dirty Engineer), have been working on an Arduino based paintball board for angels and eventually eblades and other platforms. The board is based on a commercial fork of the GCode project by Gabriel Ricard.

SEMI, FULL, fully adjustable ramp (0.1 to 29.9 bps with all sorts of settings, yes including 5.5 bps ramp)
tenth of millisecond adjustment for dwell and other parameters
User replaceable OLED
User replaceable Bluetooth module
Mobile APP for programming with phone
Programming with onboard buttons on oled
old school programming with trigger
tourney lock
dwell ramp, fsdo, loader delay, and a dozen or so more settings

head over tohttps://www.enochpaintball.com and check it out

Posted on Aug 27, 2017, 12:36 PM

Respond to this message

Goto Forum Home


eXTReMe Tracker