VoCodEr TutoRiAL

I never thought a would be posting this again.
i made this tutorial a loooong time ago to benifit
folks using the origunal sp-808 with e-mix software.

so once again ....

Vocoder help

there are 4 ways to use the vocoder patch:
1. mic =source, line in= modulator
2. pad=source, pad=modulator
3. mic=source, pad= modulator
4. mic=source, track audio modulator

here are the instructions for each method.

1. mic =source, line in= modulator
- note: only audio on the (Right) side of the line input is used for modulation.
- im not sure but, i believe the left input can be used as a source instead of the mic.
- anyway, talk into mic while playing synth into line input.
Done.


2. pad=source, pad=modulator
- "shift" + " mix common"
- scroll to FxLoc. change to (INS MASTER)
- "shift" + "track A effects button" change track A balance to L63.
- "shift" + "track B effects button" change track B balance to R63.
- "shift" + "song/track" this activates the pad to track option
- press and hold a pad in first row (pad 1,5,9,13)
- press a pad in row two (pads 2,6,10,14)
Done.


3. mic=source, pad= modulator
- press "shift" + " mix common"
- scroll to FxLoc. change to (INS MASTER)
- press "shift" + "MIC/LINE" effects button, set balance to L63
- scroll further down to Pad balance, set to R63
- talk into mic while holding down a pad
Done.


4. mic=source, track audio modulator
- press "shift" + " mix common"
- scroll to FxLoc, change to (INS MASTER)
- press "shift" + "MIC/LINE" effects button, set balance to L63
- press "shift" + "track A effects button" change track A balance to R63.
- make sure status is enabled (green light) for track A
- playback track while talking into mic.
Done.


-WildStYle