Home > Discussion Groups > Tricks & Tips

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Boards. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=95064&messageid=1113823324
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

 Return to Index  

My Masking Tech.

July 21 2003 at 11:27 AM		   (no login)
from IP address 130.76.64.15


Response to Masking Tires
What I do is take a tireless rim and lay on a piece of 2 inch masking tape stuck to glass and cut the shape of the rim. Then cut the tape into a large square which will cover the tire. Stick the square piece of tape with the circle cut out over the front side of the tire and paint the rim. You should have painted the whole wheel black first, which I use Tamiya Nato Black because it has a touch of grey in it that gives it that rubber look.

 
 Respond to this message   


Terms and Conditions of Use Report abuse