Home > Discussion Groups > Tricks & Tips

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Boards. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=95064&messageid=1113823324
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

 Return to Index  

Try some rubbing compound

July 21 2003 at 4:50 PM
  (no login)
from IP address 172.169.124.194


Response to How to remove testors metalizer?

I use Tamiya's Rubbing/Polishing Compound all the time to polish 'glass' on my motorcycles and that should remove any paint as well. Just use a Q-Tip. You might also want to wet sand the paint with some 2000grit sandpaper if the paint is thick. Or maybe just scrape it off.

As always, a test should be done before attacking the actual problem.

Ken

 
 Respond to this message   


Terms and Conditions of Use
Report abuse