Home > Discussion Groups > Tricks & Tips

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Boards. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=95064&messageid=1113823324
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

 Return to Index  

Re: question for iwata hp-c airbrush users

January 8 2004 at 7:44 PM
Fred Ng  (no login)
from IP address 81.129.2.206


Response to question for iwata hp-c airbrush users

Seems OK as long as you thin the paint down. If you look at Iwata/Medea's site (the chart on the bottom of the page), you can see that HP-C is fine with enamels.

http://www.arttalk.com/iwata/

Note you will need to change the o-ring (needle packing) now and then when it becomes worn.

 
 Respond to this message   


Terms and Conditions of Use
Report abuse