Home > Discussion Groups > Tricks & Tips

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Boards. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=95064&messageid=1113823324
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

 Return to Index  

Possibles........

November 4 2004 at 10:25 AM
  (no login)
from IP address 198.81.26.43


Response to Avoiding "tide marks"...

Hi Chris!
Here are a couple ways that might help.
1-Blend the tide marks in with stippling action using old,scruffy brush that is slightly damp with solvent.
2-some tide marks(with chalk/pigment help)can look natural in some spots if you are going after the muddy/rainsoaked look.
3-Assuming the Future coat is there to seal decals,shoot a layer of dullcoat before the washes.This helps prevent'runoff' of the wash.
4-Use a thinner wash,generally 5% color/95% solvent is good.You should just barely notice a color deposit when wet.It will be more intense as it drys.Much easier to add more than try to remove.
HTH
cheers-n-beers
Rick

 
 Respond to this message   
Responses

  1. Thanks - Chris Donovan on Nov 9, 5:29 AM
  2.  


Terms and Conditions of Use
Report abuse