Home > Discussion Groups > Tricks & Tips

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Boards. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=95064&messageid=1113823324
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

 Return to Index  

Flat finish: Humbrol matt varnish

May 6 2005 at 10:08 AM
Anonymous  (Login 53ryder)
Missing-Lynx members
from IP address 68.216.187.22

Have always used Testor's Dull-cote, thinned with lacquer thinner at about 50-50 ratio. At contest several weeks ago someone, whose work is very, very good, told me he uses Humrol Matt varnish for his 'flat coat'. Thought I'd try it so see if I liked it.

Does any use Humbrol matt varnish? Do you thin it with lacquer thinner? At 50-50? Work ok for you? Thought I'd ask before I give it a go!

Thanks in advance!
Glenn


 
 Respond to this message   
Responses

  1. Oops! Forgot to type eveything in! n/t - Glenn Ryder on May 6, 2005, 10:10 AM
  2.  
  3. Being lazy... - Paul Day on May 6, 2005, 11:32 AM
  4.  
  5. humbrol flat - Johan Detruyer on May 8, 2005, 4:45 PM
  6.  


Terms and Conditions of Use
Report abuse