Home > Discussion Groups > Tricks & Tips

Message posting guidelines:

Full real names must be used at all times.

A valid e-mail address must be provided. (This is not optional)
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Boards. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=95064&messageid=1113823324
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

 Return to Index  


June 16 2006 at 2:28 AM
Sunil Dev Prasanna  (Login bettymoo1)
Missing-Lynx members
from IP address

First time im using an airbrush or should i say first time im making a real model ( now am taking the trouble to trim the sprues properly, fill gaps, sand, mask and try weathering) and have had several problems and questions:
1)Can i spray acrylics directly onto plastic without using a primer.
2)What ratio of paint to thinner do i use for spraying
3)Can window cleaner be used as a thinner, without water.
1)Paint keeps drying on the needle or doesnt dry at all, even on the model for a long time!!!
2)Airbrush alternates between producing a fine mist, blobs of paint or just air,sprays clean water without any problems.
Sunil P

 Respond to this message   

  1. Re: Help-Newbie - Jakko Westerbeke on Jun 16, 2006, 4:59 AM
    1. Thank you. - Sunil Dev Prasanna on Jun 16, 2006, 5:45 AM

Terms and Conditions of Use
Report abuse