Home > Discussion Groups > Tricks & Tips

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Boards. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=95064&messageid=1113823324
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

 Return to Index  

CA Debonder

August 6 2015 at 1:47 PM
Tim Rupnow  (Login gimpy64)
Missing-Lynx members
from IP address 199.200.27.7


Response to CA glue

Hi Oliver,

Try some "CA Debonder" and a small cotton-swab or cheap short-bristled brush. Should clean up your glue residue with little light scrubbing and wiping with a clean cloth. There are various manufacturers and it should be carried by most hobby shops.

Word of warning : Try a little on an unnoticable area of the plastic. Debonder can react stronly to some older kinds of plastic. I use it as a plastic welder for the horrible old Trumpeter kits.


Hope this helps,


Tim

 
 Respond to this message   


Terms and Conditions of Use
Report abuse