Home > Discussion Groups > Tricks & Tips

Message posting guidelines:

Full real names must be used at all times.

A valid e-mail address must be provided. (This is not optional)
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Boards. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=95064&messageid=1113823324
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

 Return to Index  

Painting Metal gunbarrels

July 18 2016 at 12:43 PM
DAN TROUP  (Login dannybob)
Missing-Lynx members
from IP address


??? is it necessary to apply lacquer primer to the metal gunbarrels, being sold now , before applying color coat ???

[ When I was in "the NAV", many years ago, all exterior surfaces required a coating of red-lead or yellow-chromate before applying the GREY enamel ...]

[ Excepting the lower hull, which received a coating of anti-fouling green ...]
"Let's GO, First Texas !!!"

 Respond to this message   

  1. I'm not sure if it is necessary, but I spray all media with self-etching primer. - Matt Nethery on Jul 18, 2016, 4:03 PM
    1. ???and You ... - DAN TROUP on Jul 18, 2016, 6:20 PM
      1. Walmart automotive or any auto parts or hardware store. It runs ~$8 a can. - Matt Nethery on Jul 18, 2016, 7:17 PM
        1. Thanks, Matt. - DAN TROUP on Jul 30, 2016, 1:20 PM

Terms and Conditions of Use
Report abuse