Home > Discussion Groups > Tricks & Tips

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Boards. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=95064&messageid=1113823324
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

 Return to Index  

Try this

November 22 2016 at 9:18 PM
Owen R Auer  (Login mickeymantle7777777)
Missing-Lynx members
from IP address 96.239.122.136


Response to Problem with smaller wheel holes stuck on wider axles...

Cut them flush off the axles drill a hole in the center of the wheel and the center of the axle and just pin them on with metal rod, straight pin, whatever. Or you can just glue them together but they won't be as strong. You can use a disk of plastic between them if too much plastic has been cut away.

Owen

 
 Respond to this message   
Responses

  1. Cool, thanks... good idea - Andrew Tomlinson on Nov 29, 2016, 5:39 PM
  2.  
  3. Cool, thanks... good idea - Andrew Tomlinson on Nov 29, 2016, 5:39 PM
  4.  


Terms and Conditions of Use
Report abuse