Home > Discussion Groups > Tricks & Tips

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Boards. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=95064&messageid=1113823324
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

  << Previous Topic | Next Topic >>Return to Index  

spray booth

January 17 2004 at 8:57 AM
  (no login)
from IP address 65.27.156.81

I am building a large bench top spray booth in my basement. I plan on sprating everything from acrylics to urathanes. Does anyone know if permits are needed for this? The booth will have paint filters and a 1000 cfm blower vented thru metal ducting to the outside.

 
 Respond to this message   
AuthorReply

(no login)
62.253.32.5

posting guidelines

January 17 2004, 1:29 PM 

Hi Dave,
Could you please use your full name when posting.
Many thanks
missing-lynx team

 
 Respond to this message   
Current Topic - spray booth
  << Previous Topic | Next Topic >>Return to Index  


Terms and Conditions of Use
Report abuse