Home > Discussion Groups > Tricks & Tips

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Boards. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=95064&messageid=1113823324
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

  << Previous Topic | Next Topic >>Return to Index  

Advice for using Gunze "Masking Sol"

October 21 2004 at 3:18 PM
james morgan  (no login)
from IP address 206.138.130.2

I am going to attempt a "hard-edge" tri-color pattern with Gunze Masking Sol and although the instructions are in japanese, I assume you:

1 spray on your base coat
2 apply Masking Sol where you want that pattern to remain
3 overspray the second color
4 apply more Masking Sol
5 final color coat

But before I start would someone with experience offer some advice?

 
 Respond to this message   
AuthorReply
james morgan
(no login)
206.138.130.2

Sorry, this is a question.

October 21 2004, 5:11 PM 

n/t

 
 Respond to this message   
Pat McGrath
(Login Parkadge)
213.202.160.216

look below

October 22 2004, 7:00 PM 

See the "Damage lots of Damage" thread below for some answers

-Pat McGrath

 
 Respond to this message   
james morgan
(no login)
206.138.130.2

yes, for weathering, but no, for tricolor painting...

October 25 2004, 1:24 PM 

no worries, I'll experiment...

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  


Terms and Conditions of Use
Report abuse