Home > Discussion Groups > Tricks & Tips

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Boards. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=95064&messageid=1113823324
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

  << Previous Topic | Next Topic >>Return to Index  

how to strip Tamiya paint off?

February 16 2016 at 10:36 PM
Kevin J McNichols  (Login LCplMac)
Missing-Lynx members
from IP address 96.230.51.10

How can I safely strip Tamiya acrylic paints from some of my models? Hopefully with out any scrubbing and breaking of small parts. Will it remove the decals as well?

 
 Respond to this message   
AuthorReply
Matt Nethery
(Login Retiredyank)
Missing-Lynx members
172.10.252.177

Windex will strip the paint. I don't know of any way to save the decals.

February 17 2016, 5:53 PM 


 
 Respond to this message   
Kevin J McNichols
(Login LCplMac)
Missing-Lynx members
96.230.51.10

Thanks!

February 18 2016, 12:08 AM 

I'll get a gallon tomorrow. And I don't really care about the decals.

 
 Respond to this message   
Andrew Tomlinson
(Login AndrewTomlinson2)
Missing-Lynx members
82.15.127.117

Also use -

February 18 2016, 4:36 PM 

Bleach, Fairy Power Spray or Dettol I read...

Cheers
Andrew

 
 Respond to this message   
Tabb Tharrington
(Login rttharrington)
Missing-Lynx members
66.173.130.21

91% Isopropyl Alcohol

June 30 2016, 10:45 AM 

and an old soft tooth brush has worked well for me before.

 
 Respond to this message   
Alexander Sudnikovich
(Login Sudno)
Missing-Lynx members
194.190.21.202

I use dishwashing machine tablets

July 29 2016, 6:48 AM 

1-2 tablets into warm water in the sink for the night = 1-2 models cleaned from paint (but not primer!). Not agressive to photoetch/metal barrels.

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  


Terms and Conditions of Use
Report abuse