Home > Discussion Groups > Tricks & Tips

Message posting guidelines:

Full real names must be used at all times.

A valid e-mail address must be provided. (This is not optional)
  Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 20 April, registration is compulsory if you wish to post messages on the Discussion Boards. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=95064&messageid=1113823324
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.

  << Previous Topic | Next Topic >>Return to Index  

Warped SdAnh 115 platform

July 15 2016 at 10:16 AM
Sam Bagby  (Login SamBagby)
Missing-Lynx members
from IP address

I have the Elite Model SdAnh 115 trailer and the main platform is bowed and twisted. I have dipped it in almost boiling water and quickly clamped it down, but still resumes the bowed and twisted shape when removing the clamps. Any ideas? Really don't want to scratch build the platform.


 Respond to this message   
Matt Nethery
(Login Retiredyank)
Missing-Lynx members

Clamp it down and heat it, with a blow dryer.

July 15 2016, 4:26 PM 

 Respond to this message   
Chris Grove
(Login chrismmgrove)
Missing-Lynx members

Resin warps

July 16 2016, 12:05 PM 

And don't unclamp it till its cold!

 Respond to this message   
  << Previous Topic | Next Topic >>Return to Index  

Terms and Conditions of Use
Report abuse