The P68 I've got a solid 30 hours of work here, Mods include:
-coversion to direct feed
-'Mag 45 frame milled to fit Sheridan
-barrel slot ported, relieved, honed, crowned and polished
-internal flow mods
-valve reworked for flow plus custom high flow pin
-vertical air input with ring mounted PPS Stabilizer
-hammer wieght tuned to valve
-tuned springs
-trigger job
-floating ball detent
-stainless velocity adjuster
-quick strip
-polished chrome plating
She shoots like a dream, long and straight. The total trigger pull is something like 3/32". The input pressure is something like 350psi as well so she's a quiet speaker.....but you'll know when she's talking to you!
The Pgp Around 20 hours into this one, mods include:
-barrel, honed, crowned and0 polished
-valve reworked for 12 gram efficiency
-hammer wieght tuned
-Springs tuned
-trigger job
-PMI grips
-Cooper-T bolt
-Speed loader
-ball count slots
-stainless velocity adjuster
-chrome plating
-custom milled pump handle
-quick strip
Good shooter, get's 40+ from a 12gram.
The KP This one was a bear for a number of reasons and took close to 30 hours of work. The biggest being that it was hammered and in pieces when I received it. Mods/work include:
-Refinished stock
-crowned, honed and polished barrel
-valve reworked for flow
-trigger contacts polished
-bolt fitted to upper receiver (stuck terribly)
-quick strip
-cradle, trigger, guard repainted
-chrome plating
This one had more leaks that any gun I've ever seen, I spent litterally hours upon hours tracking them all down. For such a mechanically simple gun it was seriously swiss cheesed.