All right, I posted this one on warpig and didn't get the answer I wanted, so I will know ask my more educated colleagues;)
How can I put a bottomline on my Piranha LB, I know I need a UMB and an asa for below. But I want to be able to have a velocity adjuster. Does any one know if cooper-t's velocity adjustable mule, can remain on the gun and gassed up when you adjust the velocity, or do you have to de-gas and pull the mule out. Also what type of hoses does the mule use?
If the mule has to be removed to be adjusted I'll use one of the regular rear adjusters like big matt's. But then the question arises on whether it is possible to run the gas out of the side of the valve with an elbow, where it comes out already with that goofy hollow screw.
All help will be appreciated. I'm going to mix some antiques with some new stuff for this project. I've got a homeless whaler (with in-tact fish lips) that I'm going to use to feed the LB which gabriel tyler is sending me. It's got an 8" bbl, so I'll put a drop forward on it and the whaler, and I'll have a nice compact pumper, for sniping in those fast village rec games:)
If anybody reads the warpig tech forums and you've read my rant on snipers, take it with a grain of salt. I know the writing was poor and I didn't use spell check (Ok the writing is really poor) but I was trying to get an idea across that some people seem not to get. Let me know if any of you have any thoughts on my piranha question or my poorly written sniper rant.